a~~=p a~~=p power line chokes current-compensated ri ng core double chokes 250 v ac, 0.5 ? 6 a, 1 ? 82 mh series/type: b82724a/j date: july 2012 ? epcos ag 201 5 . reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited. epcos ag is a tdk group company.
2 07/12 please read cautions and warnings and important notes at the end of this document. rated voltage 250 v ac rated current 0.5 ... 6 a rated inductance 1 ... 82 mh construction current-compensated ring core double choke ferrite core wih epoxy coating (ul 94 v-0) polycarbonate case (ul 94 v-0) polyurethane potting (ul 94 v-0) sector winding features high resonance frequency due to special winding technique approx. 1% stray inductance for sy mmetrical interfer ence suppression suitable for wave soldering design complies with en 60938-2 (vde 0565-2) and ul 1283 ul 1) and/or enec (vde) approvals rohs-compatible applications suppression of common-mode interferences switch-mode power applications electronic ballasts in lamps power inverters terminals base material cuni18zn20 layer composition ni, sn hot-dipped pins 0.7 ? 0.7 (mm) lead spacing 15 ? 12.5 (mm) or 30 ? 20 (mm) marking manufacturer, approval signs and/or vde standard number, ordering code, graphic symbol, rated current, rated voltage, rated inductance, date of manufacture (yywwd.internal id code) delivery mode blister tray in cardboard box 1) ul approval with 300 v ac b82724a b82724j b82724a/j power line chokes current-compensated ring core double chokes
3 07/12 please read cautions and warnings and important notes at the end of this document. dimensional drawings and pin configuration horizontal version (b82724a) vertical version (b82724j) ind0258-r 33.1 max. 300.2 200.2 32.6 max. 4+1 0.4 3 _ 19.7 0.8 _ 23 4 1 3 2 14 0.7 ind0259-1 31.3 max. 18.5 max. 150.2 4+1 270.4 12.50.2 0.3 2.5 _ 33.2 0.5 _ 3 2 14 23 4 1 0.7 tolerances to iso 2768-c unless otherwise noted. dimensions in mm. b82724a/j power line chokes current-compensated ring core double chokes
4 07/12 please read cautions and warnings and important notes at the end of this document. technical data and measuring conditions rated voltage v r 250 v ac (50/60 hz) test voltage v test 1500 v ac, 2 s (line/line) rated temperature t r +40 c / +45 c / +50 c / +60 c / +70 c rated current i r referred to 50 hz and rated temperature rated inductance l r measured with agilent 4284a at 0.1 ma, +20 c measuring frequency: l r ?? 1 mh = 100 khz l r > 1 mh = 10 khz inductance is spec ified per winding. inductance tolerance ? 30% at +20 c inductance decrease ?? l/l 0 < 10% at dc magnetic bias with i r , +20 c stray inductance l stray,typ measured with agilent 4284a at 5 ma, +20 c, typical values measuring frequency: l r ?? 1 mh = 100 khz l r > 1 mh = 10 khz dc resistance r typ measured at +20 c, typical values, specified per win- ding solderability (lead-free) sn96.5ag3.0cu0.5: +(245 ? 5) c, (3 ? 0.3) s wetting of soldering area ?? 95% (to iec 60068-2-20, test ta) resistance to soldering heat (wave soldering) +(260 ? 5) c, (10 ? 1) s (to iec 60068-2-20, test tb) climatic category 40/125/56 (to iec 60068-1) storage conditions (pac kaged) ?25 c ? +40 c, ?? 75% rh weight approx. 27 g ? 32 g approvals en 60938-2, ul 1283 b82724a/j power line chokes current-compensated ring core double chokes
5 07/12 please read cautions and warnings and important notes at the end of this document. characteristics and ordering codes ? = approval granted i r a l r mh l stray,typ ? h r typ m ? t r c ordering code approvals horizontal version vertical version 0.5 82.0 1000 2300 +60 b82724a2501n001 b82724j2501n001 ?? 0.5 68.0 700 2000 +70 b82724a2501n020 b82724j2501n020 ?? 0.8 49.0 500 1950 +50 b82724a2801n002 ? ? ? 0.8 49.0 500 1950 +50 ? b82724j2801n002 ?? 1.0 39.0 350 750 +60 b82724a2102n021 b82724j2102n021 ?? 1.0 33.0 400 750 +60 b82724a2102n001 b82724j2102n001 ?? 1.4 37.0 320 420 +60 b82724a2142n021 b82724j2142n021 ?? 1.4 27.0 260 460 +50 b82724a2142n001 b82724j2142n001 ?? 1.6 10.0 120 350 +60 b82724a2162n001 b82724j2162n001 ?? 1.8 33.0 300 400 +40 b82724a2182n021 b82724j2182n021 ?? 2.0 6.8 80 170 +60 b82724a2202n001 b82724j2202n001 ?? 2.2 20.0 180 250 +40 B82724A2222N021 b82724j2222n021 ?? 2.2 15.0 140 210 +45 b82724a2222n020 b82724j2222n020 ?? 2.5 10.0 90 140 +40 b82724a2252n020 b82724j2252n020 ?? 2.5 5.6 55 125 +60 b82724a2252n001 b82724j2252n001 ?? 2.7 6.6 60 110 +60 b82724a2272n020 b82724j2272n020 ?? 3.0 12.0 110 125 +40 b82724a2302n021 b82724j2302n021 ?? 3.3 5.6 45 95 +40 b82724a2332n001 b82724j2332n001 ?? 4.0 4.7 40 65 +60 b82724a2402n020 b82724j2402n020 ?? 4.0 3.3 35 65 +60 b82724a2402n001 b82724j2402n001 ?? 4.8 3.3 35 46 +70 b82724a2482n020 b82724j2482n020 ? ? 5.0 2.5 25 38 +60 b82724a2502n001 b82724j2502n001 ?? 5.1 4.1 30 46 +60 b82724a2512n020 b82724j2512n020 ?? 6.0 3.3 17 25 +60 b82724a2602n041 b82724j2602n041 ?? 6.0 1.8 20 31 +40 b82724a2602n020 b82724j2602n020 ?? 6.0 1.0 12 23 +60 b82724a2602n001 b82724j2602n001 ?? b82724a/j power line chokes current-compensated ring core double chokes
6 07/12 impedance |z| versus frequency f measured with windings in parallel at +20 c, typical values impedance |z| versus frequency f measured with windings in parallel at +20 c, typical values impedance |z| versus frequency f measured with windings in parallel at +20 c, typical values impedance |z| versus frequency f measured with windings in parallel at +20 c, typical values b82724a/j power line chokes current-compensated ring core double chokes
7 07/12 impedance |z| versus frequency f measured with windings in parallel at +20 c, typical values current derating i op /i r versus temperature t a b82724a/j power line chokes current-compensated ring core double chokes
8 07/12 cautions and warnings current-compensated ring core double chokes please note the recommendations in our inducto rs data book (latest edition) and in the data sheets. ? particular attention should be paid to the derat ing curves given there. derating must be applied in case the ambient temperature in the application exceeds the rated temperature of the component. ? ensure the operation temperature (which is the sum of the ambient temperature and the temperature rise caused by loss es / self-heating) of the component in the application does not exceed the maximum value specifi ed in the climatic category. ? the soldering conditions should also be observed. temperat ures quoted in relation to wave soldering refer to the pin, not the housing. if the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. in particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation. washing processes may damage the product due to the possible static or cyclic mechanical loads (e.g. ultrasonic cleaning). they may cause cracks to de velop on the product and its parts, which might lead to reduced reliability or lifetime. the following points must be observed if the components are potted in customer applications: ? many potting materials shrink as they harden. t hey therefore exert a pr essure on the plastic housing or core. this pressure can have a delet erious effect on electr ical properties, and in extreme cases can damage the core or plastic housing mechanically. ? it is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. ? the effect of the potting material can chan ge the high-frequency behaviour of the components. ferrites are sensitive to direct impact. this c an cause the core material to flake, or lead to breakage of the core. even for customer-specific produc ts, conclusive validation of t he component in the circuit can only be carried out by the customer. please read cautions and warnings and important notes at the end of this document.
9 07/12 important notes current-compensated ring core double chokes the following applies to all produc ts named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our produc ts in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our produc ts for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons , it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specification is suitable for us e in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic com ponent could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other acti on taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed . 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www .epcos.com/material). should you have any more detailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please c heck therefore to what extent pr oduct descriptions and specifications contained in this publicati on are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all produc ts named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?general terms of delivery for products and services in the electrical industry? published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, form fit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineform er, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
